The torsion force of the spring is used to measure how much torque the workpiece can withstand. It is mainly used to measure small workpieces such as screwdrivers. Everyone knows that whether the screwdriver is cross or straight, the torque requirements are relatively large, and sometimes also There is no need to judge the amount of torque to withstand according to the strength of the person, and the most vulnerable is the connection between the handle and the handle, so the key to producing a good one is the connection, and it is indispensable for testing. Only after we test will we have information about our products, will sell them at a good price, and raise our profits.
The above is just a brief introduction and application of the spring torsion testing machine. We can discover how powerful its function is, but how should we use it? Are you in a hurry now, but don’t worry, I will introduce how to use it right away. First put the measuring workpiece on the workbench to tighten, then power on, enter the initialization mode, etc. After the test is successful, we start to start the machine, first apply torque to the torsion testing machine, and then slowly release the torque force to see if the workpiece can withstand this Range torque, if possible, then increase the torque to continue the test. When the workpiece reaches the limit, write down the data, and then record the range.
This is the end of the operation. Let me tell you about the daily maintenance. You must be careful when using it, because the main torque of the spring torque testing machine comes from the spring. If the spring is damaged, our measurement will be useless, so we must use it. Be careful and grasp the accuracy of the measurement.
