U.S. Epsilon Extensometer_Other equipment_详情

Features of American Epsilon extensometer:

Universal axial extensometer, suitable for measuring small deformation in axial tension, compression and cycle test;

Gauge range: 10-50 mm;

Deformation range: 5%-100% of gauge length;

The extensometer can be used to measure the deformation of materials such as metals, plastics, composites and ceramics;

It is suitable for tensile and compression tests, and can also be used for deformation measurement in cyclic tests;

You can use the quick clamping device to install the extensometer to the sample with one hand in a few seconds, or use a spring or rubber band to install the extensometer to the sample.

There is no need to remove the extensometer when the sample breaks;

Full bridge, 350 ohm strain design, compatible with most testing machines;

Two-way over-travel mechanical stop;

Meet the existing ASTM B-1 level and ISO9513 level 0.5 accuracy requirements;

Hard tool steel blades are easy to replace, and a set of spare blades is provided with it;

The extensometer can be selected according to the temperature range, and the applicable temperature range is -265℃－+175℃;

A high-grade foam pad carrying case is provided;

The arm and partition are easy to maintain, and the gauge length can be changed according to the test requirements;

It adopts double-bending structure design, which is sturdy and durable, insensitive to vibration, and suitable for high frequency test;

U.S. Epsilon extensometer specifications:

Excitation voltage: It is recommended to use 5-10V DC voltage, the maximum is 12V DC or AC voltage

Output: Rated 2-4mV/V, depending on the model

Linearity: 0.10%-0.15% of full scale, depending on the model

Temperature range: Standard type (-ST) is -40℃－+100℃

Connection: flexible wire, standard length is 2.5m

Standard quick clamping tool: Suitable for round specimens with a maximum diameter of 25mm, flat specimens with a maximum size: 12mm thick, 31mm wide

Operating force: generally 30 grams

American Epsilon Metal Deformation Extensometer Universal Metal Small Deformation Extensometer Axial Extensometer Option:

Quick clamping tool for large specimens

Connectors that can be connected to any brand of test equipment

Shunt calibration module

Gauge Adapter

Special blade

American Epsilon Metal Deformation Extensometer Universal Metal Small Deformation Extensometer Model Description:

Brand: American Epsilon

Model: 3542-Code 1-Code 2-Code 3

Please refer to the extensometer housing or manual for the specific model (code 1: gauge length. Code 2: measurement range, linearity. Code 3: temperature range.)

The following gauge length, deformation and temperature range can be combined in any combination

Code 1 gauge length

-010M 10.0 mm

-012M 12.5 mm

-025M 25.0 mm

-050M 50.0 mm

Code 2 Measuring range linearity

-005 ±5% 0.10% *

-010 ±10% 0.10%

-020 ±20% 0.15%

-025 ±25% 0.15%

-050 +50%/-10% 0.15%